1300 749 422
1300 749 422
USB Fast Charger for Prado 150 and LC 200

USB Fast Charger for Prado 150 and LC 200


  • Perfect fit for Toyota OEM switch Socket
  • Quick Install Wiring Harness with inline circuit protection
  • Blue LED which are on whenever the unit is powered

In stock (can be backordered)

SKU: 22SQUSBP150 Categories: , ,


Fast Charge USB Charger for Toyota Switch Socket

These Fast Charge  USB Chargers are a fine piece of Solid Kit. 2.1 Amp Charging per port.

Trade Enquiries Welcome.

These USB Chargers are a fine piece of Solid Kit. 2.1 Amp Charging In the Toyota standard 22mm square socket.
Have you noticed how slow the standard Toyota USB ports are to charge your devices? We overcame this problem with a dedicated charging port.

When you when you hit the road for a trip, you have smart phones, tablets, iPads, GPS navigators, camera’s, high powered LED torches which all charge from USB.

Most vehicles come with too few USB charge ports.  Cigarette lighter plug in USB chargers are unsightly and unreliable.

They feature similar form to the Toyota switches and look like original equipment.

New model includes enough cable to get you over to the fuse box.

Fuse tap adapter included, and negative cable terminated with ring for easy earth attachment (see install tips for more information).


Installation of the USB Charger is a snap (quite literally).

Once your switch blank is removed, it is quite simply a matter of pushing the USB Charger in place.

They are nice snug fit, so be prepared to put a little pressure on them. Once in place they are held tight by locking tabs and do not budge.

The wiring is as simple as connecting two wires.  The positive wire is connected to your preferred power source.  You have several options here:

  • a) Connect to an “IGN” source to have the USB Charger come on when you switch on your car
  • b) Connect to an “ALWAYS ON” source if you prefer to leave them on the entire time.

The harness included with the charger is our specifically designed fuse tap harness. Simply plug in to the fuse box by finding a spare slot, or replacing one of your existing fuses.

Model Compatibility

The switch size is very common in Toyota, and is used extensively throughout the entire range. Any Toyota 22mm square socket will accept these.

If in doubt, simply measure your existing switches/sockets.  If they are approximately the size they will fit.

The Add A Circuit fuse tap adapter. These are the best thing to happen to after market electrical accessories. The fuse in line with the cable is the additional circuit. The fuse closest to the pins (blue) is the original. addacircuitinstalltip

Additional information

Weight .1 kg
Dimensions 13 × 10 × 2 cm