1300 749 422
1300 749 422
QuickCharge 4.8 Amp Dual USB Charger for Toyota Prado 120, FJ, Hilux (pre 2015) and LC100

QuickCharge 4.8 Amp Dual USB Charger for Toyota Prado 120, FJ, Hilux (pre 2015) and LC100


  • Perfect fit for Toyota OEM switch Socket
  • Quick Install Wiring Harness with inline circuit protection
  • Two Hidden Blue LED’s which are on whenever the unit is powered

In stock (can be backordered)

SKU: QC3P120USB Categories: , ,


Quick Charge Dual USB Charger for Toyota Switch Socket

These Quick Charge 3 USB Chargers are a fine piece of Solid Kit. 2.4 Amp Charging per port.

Qualcomm Circuitry is the fastest on the market for charging your high powered devices, with the smarts to be backwardly compatible with standard charging.

When you when you hit the road for a trip, you have smart phones, tablets, iPads, GPS navigators, camera’s, high powered LED torches which all charge from USB.

Most vehicles come with too few USB charge ports.  Cigarette lighter plug in USB chargers are unsightly and unreliable.

The QC3 USB Charger is a perfect fit for the standard Toyota:

  • 40mm x 20mm  switch socket (Prado 120, FJ Cruiser, Landcruiser 100 Series, Hilux Pre 2015)

They feature similar form to the Toyota switches.

New model includes enough cable to get you over to the fuse box.

Fuse tap adapter included, and negative cable terminated with ring for easy earth attachment (see install tips for more information).


Installation of the Dual USB Charger is a snap (quite literally).

Once your switch blank is removed, it is quite simply a matter of pushing the Dual USB Charger in place.

They are nice snug fit, so be prepared to put a little pressure on them. Once in place they are held tight by locking tabs and do not budge.

The wiring is as simple as connecting two wires.  The positive wire is connected to your preferred power source.  You have several options here:

  • a) Connect to an “IGN” source to have the Dual USB Charger come on when you switch on your car
  • b) Connect to an “ALWAYS ON” source if you prefer to leave them on the entire time. Current Draw is 1.7 Ah per day when left in standby “ALWAYS ON”

The harness included with the charger is our specifically designed fuse tap harness. Simply plug in to the fuse box by finding a spare slot, or replacing one of your existing fuses.


The Add A Circuit fuse tap adapter. These are the best thing to happen to after market electrical accessories. The fuse in line with the cable is the additional circuit. The fuse closest to the pins (blue) is the original. addacircuitinstalltip

Model Compatibility

The Dual USB Charger is compatible with the models listed below.   The 40mm x 20mm switch size is very common in Toyota, and is used extensively throughout the entire range.  If in doubt, simply measure your existing switches/sockets.  If they are approximately the size they will fit.

Additional information

Weight .1 kg
Dimensions 13 × 10 × 2 cm