Description
Tons of light from 3 x 3 W quality CREE LEDs.
Many colours to suit many applications.
Aluminium housing and tough as nails lens, which sits flush to the housing, make this virtually indestructible.
Rock solid build quality to typical Aurora standard makes these little lights truly worthy of the Solid Kit badge.
| Colour | Application | |
| White | Interior – Cabin, Cargo Reverse Rock Light Under Vehicle / Wheel Arch / Chain Fitting / Under Side Step etc Work Light, Awning Light, Roof Bar Side & Rear Lights Engine Bay |
|
| Red | Tail Light, Brake Light for Off Road Vehicles, Quads, Enduro Red PORT Left Navigation Lights Rear Fog Lights Trailing Marker Lights Trucks, Caravans, Campers |
|
| Green | Interior – Cabin, Cargo Green STARBOARD Right Navigation Lights Under Vehicle / Wheel Arch / Chain Fitting / Under Side Step etc Zombie Hunting Trickster / Drifter |
|
| Blue | Interior – Cabin, Cargo Under Vehicle / Wheel Arch / Chain Fitting / Under Side Step etc Zombie Hunting Trickster / Drifter |
|
| Amber | Emergency & Safety Vehicle Indicator Turn Signal Forward Marker Light Trucks, Caravans, Campers |
Packaging
The Multi Function Mini Light come with a rubber mount plate, a pair of bolts with washers and nyloc nuts per light.
Each light has a factory fitted and sealed and rubberised wiring loom of 120cm+, which should reach to most places within or around your vehicle. Wiring Approach
– The wiring is as simple as connecting positive and negative.
– A relay is recommended in all wiring situations
– Switching can be accomplished via manual dash switches, interior light circuit, reverse circuit according to application. Due to the wide range of uses, switches are not included with the lights.
* Please ensure the unit and your wiring are protected with an appopriate sized fuse*
Each light has a factory fitted and sealed and rubberised wiring loom of 120cm+, which should reach to most places within or around your vehicle. Wiring Approach
– The wiring is as simple as connecting positive and negative.
– A relay is recommended in all wiring situations
– Switching can be accomplished via manual dash switches, interior light circuit, reverse circuit according to application. Due to the wide range of uses, switches are not included with the lights.
* Please ensure the unit and your wiring are protected with an appopriate sized fuse*
