1300 749 422
1300 749 422

Dual Battery Systems

Showing all 4 results

  • Provides a termination point for:
    • Tee between rear Anderson Plug and rear fuse block
    • Extend factory starter and earth cables under bonnet.
    • Outboard motor factory cable extension
    • Waterproof and dust-proof – can be mounted just about anywhere that suits your application
    • Designed for high current loads and harsh conditions making it excellent for near-the-battery applications
    • Can be configured with 2 or 3 MIDI® fuses (not included)
    • M5 threaded bolts, and cover seal and cables seals included
    • Blue Sea quality – built withstand the toughest environment
    • Huge 500 Amp Winch-friendly rating, with 2500 Amp 10 second crank rating (2500! That is not a typo)
    • Manual override knob provides jump start capability plus  an added level of safety allowing control with or without power and offering LOCKED OFF capablility for servicing
    • LED output to remotely indicate switch state -requires optional LED
    • 3.8″-16 tin-plated copper studs for maximum conductivity and corrosion resistance
    • 7/8″ (22mm) stud length accepts multiple cable terminals
    • Silver alloy contacts provide high reliability for switching live loads
    • Waterproof – rated IP66 from water projected in powerful jets
    Control Circuit Connection Tinned Wire
    Nominal Voltage 12V DC
    Manual Control Yes
    Engine Isolation Yes
    Mounting #10
    Start Assist Yes
    Start Isolation Yes
    Amperage Operating Current 13mA
    Amperage Operating Current when changing state <7.0A
    Terminal Stud Torque 140 in-lb (15.82 Nm)
    Continuous Rating 500A
    Intermittent Rating 700A (5 min)
    Cranking Rating 10 sec 2500A
    Cranking Rating 1 min 1100A
    Cable Size to Meet Ratings 4/0 AWG x 2
    Live Current Switching 300A @ 12V DC
    Switching Cycles 100000
    Terminal Ring Diameter Clearance 1.12in (28.45 mm)
    Terminal Stud Length 1.50in (38.1 mm)
    Terminal Stud Size 3/8″ – 16 (M10)
    Wire Size 20 AWG
    Relay Contact Position
    Combine 30 sec 13.5V
    Combine 90 sec 13.0V
    Open 10 sec 12.35V
    Open 30 sec 12.75V
    Open High 16.2V
    Weight 2.06lb (0.93 kg)
  • Clearance Sale ! Only 2 Left!

    30 Amp DC and Solar MPPT  Charger

    Future-proof, fully progammable for battery type (including Lithium) and battery size

    Enerdrive Build Quality, Know How and Support

    Straight Forward Wiring, No relays required



Showing all 4 results